# Hurco VM10i Used Price & Common Problems | CNC Ledger

> Hurco VM10i: used $34,500 to $69,500. Documented problems: control / cutter compensation. What to inspect before you buy.

**Verdict:** inspect

Used Hurco VM10i: $34,500–$69,500 observed used across 3 listings. Buy only after inspection.

**Observed used price:** $34,500–$69,500

**Documented failure risks:**
- Control / cutter compensation: With cutter compensation active, the WinMax control can generate an unexpected arc move on contour exit, driving the tool back into the finished part and damaging it.
- Spindle drawbar / belleville washers: Deteriorated belleville washers in the spindle drawbar reduce clamping force below spec, causing premature cutter breakage and spindle fretting; roughly 74 replacement washers at $4 each were needed to restore proper performance.

## Sources
- [practicalmachinist.com (failure evidence)](https://www.practicalmachinist.com/forum/threads/hurco-vm10i-with-winmax-crazy-lead-outs-problem-in-compensation.383620/) (accessed 2026-09-05)
- [practicalmachinist.com (failure evidence)](https://www.practicalmachinist.com/forum/threads/hurco-vm10i-bellville-washer-replacement.427082/) (accessed 2026-09-05)
- [eBay live listings (market price observation, 3 matching whole-unit listings)](https://www.ebay.com/sch/i.html?_nkw=Hurco%20VM10i) (accessed 2026-09-05)

_Last verified 2026-09-05. Source: CNC Ledger — https://cncledger.com/machines/hurco-vm10i/ — every claim checked against a primary source before publication (see /methodology/)._